Entering An Auto-Configuration Code; Selecting A Provider And Loading Provider Data To The Base - Gigaset C590 ip Manual

Configuring the VoIP connection
9

Entering an auto-configuration code

IP Wizard
Activation code for
autoconfiguration:
< C
10

Selecting a provider and loading provider data to the base

Select your country
Country 1
Country 2
Country 3
Country 4
Country 5 V
Back
> p
Select your country with the control key
(press down arrow).
Press the display key §OK§.
>
The general access data for your VoIP provider will be downloaded and saved on the phone.
12
>
Enter your auto-configuration code using the keypad
(max. 32 characters).
Press the right-hand display key §OK§.
>
All data required for VoIP telephony is loaded directly from
the Internet to your phone.
Following successful download, Your IP account is regis-
tered with your provider. is shown in the display.
Proceed as described under
OK
OK
12
.
Select a Provider
Provider 1
Provider 2
Provider 3
Provider 4
Provider 5 V
Back
p
>
Select your provider with the control key
(press down arrow).
Press the display key §OK§.
>
OK