Table of Contents
Advertisement
Wall Mount 2-Way RF Compact Color Touchpanel
Main Menu
Touch Screen Calibration Menu
Diagnostics Menu
Setup Menu
6
Wall Mount 2-Way RF Compact Color Touchpanel: STX-1550CW
Upon entering SETUP MODE, the Main Menu, shown to the left, displays four
buttons: TOUCH SCREEN CALIBRATION, DIAGNOSTICS, SETUP, and
SAVE SETUP AND RUN PROGRAM.
The SAVE SETUP AND RUN PROGRAM button, located at the upper right
corner of the Main Menu, saves all of the setup information to EEPROM and
displays the main page that has been programmed into the system.
The remaining buttons on the Main Menu open additional menus and their
functionality is described in the following paragraphs.
Touch Screen Calibration Menu
Calibration of the touchscreen is required if the active touch area of a button does
not coincide with the button's image. Select the TOUCH SCREEN
CALIBRATION button on the Main Menu to display the Touch Screen Calibration
Menu, shown to the left. The menu offers the choice to initiate calibration with the
Perform Calibration button or return to the previous screen with the Return to
Main Menu button. Choose an option by touching the correct button. When
touching the screen, be as accurate as possible.
If you proceed to calibrate the touchpanel, the screen prompts you with the message
"Touch Screen Calibration Menu" nearly centered on the display. Another message,
"Touch Upper Left Corner", appears in the upper left corner. Touch the corner of the
screen to initiate calibration. Another message, "Touch Lower Right Corner",
appears in the lower right corner. Touch the corner of the screen to return to the
Main Menu and terminate calibration.
NOTE: When touching the screen during calibration, be as accurate as possible. A
fine tipped, but not sharp, object (i.e., pen cap) should be used to get the finest
possible resolution.
Diagnostics Menu
The DIAGNOSTICS button from the Main Menu should only be used under
supervision from a Crestron customer service representative during telephone
support. The options available from the Diagnostics Menu, shown to the left, are
beyond the scope of this guide. Select the RETURN button, located at the lower
right corner, to get back to the Main Menu.
Setup Menu
To obtain the Setup Menu, shown to the left, select the SETUP button from the
Main Menu. Many options for setting touchpanel parameters are available from the
Setup Menu. This menu also provides buttons (MANAGE POWER, INTERFACE
and SOUND) that open submenus for specific features. After setup parameters have
been set, select the RETURN button, located at the lower right corner of the Setup
Menu.
Crestron STX-1550CW
Operations Guide - DOC. 5849
Advertisement
Table of Contents
