Table of Contents
Advertisement
Wall Mount 2-Way RF Compact Color Touchpanel
Physical Views of STX-1550CW
UPLOAD
CONNECTOR
Have a comment about
Crestron software? Direct software
related suggestions and/or complaints
to Crestron via email
(software@crestron.com).
Do not forward any queries to this
address. Instead, refer to "Further
Inquiries" on page 13 for assistance.
2
Wall Mount 2-Way RF Compact Color Touchpanel: STX-1550CW
Physical Description
The touch-sensitive viewing screen is located on the top of each touchpanel. The
electronic hardware is housed in a high impact, black molded plastic enclosure. As
shown below, connectors to upload touchscreen projects via a personal computer (PC)
and to power the unit using the external AC power pack (and simultaneously trickle-
charge the ST-BTP) are located on the left and right sides of the unit, respectively.
REFERENCE
(22.23 cm)
5.70 in
(14.48 cm)
CRESTRON
At the underside of the unit is a docking plate and the power pack/battery
compartment that holds one ST-BTP. Electrical contacts for the DA-1550CW are
through the underside of the unit. There are also four rubber feet on the underside for
stability and to prevent slippage.
Software
The STX-1550CW is supported by the VisionTools™ Pro-e (VT Pro-e) SmarTouch
Wizard that automatically configures the entire system and the touchpanel pages. VT
Pro-e, a design and programming Windows®-based software, permits the creation of
unlimited control screen variations incorporating two and three-dimensional graphics
and text. A set of pages which make up a project can be designed for each
touchpanel application. Each page contains objects such as custom control graphics,
two and three-dimensional buttons, sliders, and digital readouts which allow the user
to interface with the Cresnet system. The project is uploaded to the touchpanel and
programmed into the flash PROM. The touchpanel uses the programmed project
until another set is uploaded from the PC. The PC may be disconnected from the
rack or panel except during reprogramming. VT Pro-e also allows users the option to
generate projects destined for web browsers rather than for physical touchpanels.
For additional software information, refer to the help file provided with the software.
A copy of the software can be obtained from the Downloads page (TOUCHPNL
Library) of Crestron's website (www.crestron.com). New users are required to
register in order to obtain access to the FTP site. A tutorial is provided as a guide for
the novice programmer.
Crestron STX-1550CW
5.01 in
(12.73 cm)
(8.45 cm)
8.75 in
3.33 in
AC POWER
CONNECTOR
Operations Guide - DOC. 5849
Advertisement
Table of Contents
