Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Sharp LC-50LB150U User Manual

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off of the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
37
Cautions
• Batteries should not be exposed to
• Battery chemicals can cause a rash. If the
• Make sure that batteries are disposed of
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is
• If the remote control is not going to be

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
sensor on the front of your TV. For the location
of the remote sensor, see "Front" on page 9.
www.sharpusa.com
LC-50LB150U Sharp 50" LED TV
excessive heat, such as sunshine, heat
registers, or fire.
batteries leak, clean the battery
compartment with a cloth. If chemicals
touch your skin, wash immediately.
correctly. Do not burn or incinerate.
depleted.
used for an extended period of time,
remove the batteries.