Sharp LC-50LB150U User Manual page 44

13 Press or to highlight Antenna, Cable, or
Satellite Box, then press ENTER.
A If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
39
B If you select Cable, a message asks if you
• Select No, then press ENTER if no cable
• Select Yes, then press ENTER if a cable box
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
www.sharpusa.com
LC-50LB150U Sharp 50" LED TV
have a cable box:
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
is connected. A message asks how you
connected the cable box to your TV.
• Select HDMI, Component, or AV, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).