Connecting A Basic Home Theater System; Using Digital Audio - Sharp LC-50LB150U User Manual

Connecting a basic home theater system

Using digital audio

On your TV
Digital optical
audio cable
connector
Digital optical
audio jack
To connect a basic home theater system or sound bar using digital audio:
1 Make sure that your TV's power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL AUDIO OUTPUT jack on the back of your TV
and to the optical AUDIO IN jack on the digital home theater system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
5 On your TV, set the Digital Audio Out option on the AUDIO menu to PCM. See
page 45.
33
Digital optical audio cable
www.sharpusa.com
LC-50LB150U Sharp 50" LED TV
Home theater
system
"Adjusting sound settings" on