Table of Contents
Advertisement
CLOCK FUNCTIONS
Clock functions
SYMBOL
Setting the clock functions
1. Activate the appliance and set an oven function and temperature (not necessary for
Minute minder and Time of day).
2. Touch
related symbol, for example Minute minder
3. Touch
When the set time ends, an acoustic signal sounds for 2 minutes. "00.00" goes on in the
display and the related function indicator flashes. The appliance deactivates automatically.
Touch a sensor field to stop the acoustic signal.
General instruction:
• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5
seconds, touch
• If you set the time, the symbol continues to flash for approximately 5 seconds. After
these 5 seconds, the symbol comes on. The time starts to count down for Minute minder.
For Duration and End the time starts to count down after the function starts.
• If you want to delay the start of the cooking time use End function
• If you want to end cooking earlier (before end of clock functions) use
AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information" chapter.
Automatic Programmes
For an automatic programme, use the recipes from section "Automatic programmes".
Setting a programme
1. Activate the appliance.
2. Use
to access the automatic programmes menu.
FUNCTION
MINUTE MINDER
DURATION
END
TIME OF DAY
again and again until the display shows the necessary clock function and the
or
to set the necessary time.
or
to set the time.
Use to set a countdown. When the time ends, an acoustic sig-
nal sounds. This function has no effect on the operation of
Use to set how long the oven operates.
Use to set when the oven stops.
Shows the time. To set, change or check the time. Refer to
"Setting and changing the time of day".
.
Clock functions
DESCRIPTION
the oven.
.
.
13
Advertisement
Table of Contents
