Advertisement
Driver Installation is Completed!
To confirm the DSB-C120 is properly installed, click "START"
→ "SETTINGS"→"CONTROL PANEL". Double-click "SYSTEM".
Select the "HARDWARE" tab and click the "DEVICE MANAGER"
button. Confirm that "D-Link DSB-C120" appears in the "IMAGE
DEVICES" section.
Once properly installed, you are ready to start immediately capturing
images and acreating video with the DSB-C120.
Please refer to the DSB-C120 Manual on the CD included with this
product for information on how to install and use the VP-EYE 4.0
software
7
Advertisement
