Advertisement
Australian Power Receptacle: PWR-AU-B
Description
The PWR-AU-B power receptacle is an adaptor for the QuickMedia™ international family of
FlipTop boxes. This receptacle is rated at 250 V, 10 A. Refer to the following illustrations for
installation.
CAUTION: Ensure that the power is disconnected during installation.
Applicable Countries:
Tools Required:
Front, Side, and Back Views of the PWR-AU-B
After connecting the wires as shown in the
illustration, orient the receptacle vertically
(with the single mounting clip facing up)
and snap the receptacle into the bezel.
Further Inquiries
If you cannot locate specific information or have questions after reviewing this sheet, please
take advantage of Crestron's award winning customer service team by calling the Crestron
corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local
time zone, refer to the Crestron website (www.crestron.com) for a listing of Crestron
worldwide offices.
You can also log onto the online help section of the Crestron website to ask questions about
Crestron products. First-time users will need to establish a user account to fully benefit from
all available features.
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
Australia, Fiji, New Zealand, and Papua New Guinea
Flat blade or Phillips screwdriver
Wire Connections
Installation Guide – DOC. 6376
Specifications subject to change without notice.
(2013034)
06.05
www.crestron.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crestron PWR-AU-B
Summary of Contents for Crestron PWR-AU-B
- Page 1 Crestron website (www.crestron.com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.
- Page 2 CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
Need help?
Do you have a question about the PWR-AU-B and is the answer not in the manual?
Questions and answers