Secure the relay unit on the
13
machine with the two mounting
hooks.
14
Lock the relay unit lever.
Close the relay unit cover
15
16
Remove the two finisher –
mounting hooks from the box.
Remove the main output tray and
17
the sub output tray , and then
unpack them.
18
Hold the left and right sides of the
staple finisher and lift it out of the
box.
When grabbing the staple
finisher, be sure to grab
the areas indicated in the
illustration.
19
Remove the sheet from the staple
finisher.
Remove the tape and packing
20
materials from the connectors and
the outside of the staple finisher.
21
Open the stapler cover, and then
remove the tape securing the
staple catridge.
21a
Changing procedure: Open the
stapler cover, remove the old & align the
new staple cartridge.
(Separate description incl. in mc 55x0
User Guide Page 163)
Staple Finisher mc5550/5570
- 6 -