Mode Controls (Continued) - FireplaceXtrordinair 4237 EG Owner's Manual

14

Mode Controls (continued)

Accent Light
The Accent Light (night light) inside the heater may be turned on and off using the up and down buttons
when in Accent Light mode (see below). The center display will display the 7 settings, from "OFF" to "HI"
for full on.
When in accent light
mode, this icon will
appear darkened.
HINT: If you wish to leave the accent light on while turning the burner off, adjust the Flame Height
setting to "OFF" (see above).
Comfort Control (rear burner)
The comfort control (rear burner) may be turned on and off using the up and down buttons when in
Comfort Control Mode (see below). The center display will display either "ON" or "OFF".
When in comfort
control mode, this
icon will appear
darkened.
Ember-Glo Light (AUX)
The Ember-Glo light may be turned on and off using the up and down buttons (see illustration below).
You can adjust the brightness of the light using the built-in rheostat.
F
OFF
© Travis Industries
Operation
F
This is the accent light
OFF
read-out. Use the up
or down buttons to
adjust the accent light
brightness (7 settings).
MAX
F
This is the comfort
OFF
control read-out. Use
the up button to turn
on, down button to
turn off (2 settings).
When in EmberBed
mode (AUX), this
icon will appear
darkened and the
readout will display
status.
9/16/2021 - 1562
High
Medium
Off
On
Off
Use the rheostat on the
fireplace to control the
EmberBed brightness.
4237 EG Owners