Crestron DualTouch DTT-18 Operation Manual page 18

Crestron DTT-18
• DTT-18: DualTouch™ Technology Touchpanel
14
DualTouch™ Technology Touchpanel
2. Brightness – Use the (+)/(-) buttons to increase or decrease brightness, press
the Enter button to save. Default is 70.
3. Phase – (VGA only) Use the (+)/(-) buttons to manually reduce horizontal
distortion lines. The Reset option
Press Enter to save. Default is 30.
4. Pitch – (VGA only) Use the (+)/(-) buttons to manually reduce vertical
distortion lines. The Reset option
Press Enter to save. Default is 50.
5. Horizontal Center – (VGA only) Use the (+)/(-) buttons to manually move
the image left or right. The Reset option
adjustment. Press Enter to save. Default is 50.
R
is used for automatic adjustment.
R
is used for automatic adjustment.
R
is used for automatic
Operations Guide – DOC. 6290