Getting Started - ResMed VPAP ST Welcome Manual

Getting started

1. Make sure the power is connected.
2. Adjust the ramp time if required.
3. Fit your mask as described in your mask user guide.
4. To start therapy, simply breathe into the mask and/or press
5. Lie down and arrange the air tubing so that it is free to move if you
turn in your sleep.
6. To stop treatment at any time, remove your mask and/or press
Notes:
• If your clinician has enabled SmartStart your device will start
automatically when you breathe into the mask and stop automatically
when you remove the mask.
• If power is interrupted during treatment, the device automatically
restarts therapy when power is restored.
6
368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 6
.
.
4/19/2011 11:18:37 AM