CONTROLS AND CONNECTIONS
3
4
5
LCD Display
1
The top row of the LCD indicates the PARAMETER, whilst the bottom row
displays the VALUE of that parameter.
Rotary Encoders
2
Used to modify the speaker's settings.
Rotate the top encoder to change to a different PARAMETER.
Rotate the bottom encoder to modify the VALUE of said parameter.
Press & hold the top encoder to show the firmware version.
Press the bottom encoder to switch between coarse & fine parameter
mode. Coarse mode is indicated by a '*' symbol at the bottom right of the
LCD and is used to make larger changes to the parameter VALUE. This is
useful, for example, when sweeping the frequency of a PEQ between 20
and 20,000 Hz.
Digital Through Output
3
AES3 digital XLR3m provides a 'through' output for daisy-chaining this
speakers' audio input to another speaker. The sample rate of this output is
fixed at 96kHz, 24 bits.
2
1
8
6
5
7
7
2
1
3
4
6
8