Table of Contents
Advertisement
Input Source
Options: Analogue, AES3 L, AES3 R, AES3 L+R, Expansion Card (if present)
Level Trim
Options: Range: ± 10dB in 0.1dB steps
The Level Trim parameter adjusts the overall output level of the speaker.
Max Analogue Input Level
Options: +20dBu or +24dBu
This parameter sets the A-D converter's maximum input signal level before
clipping. It is used to optimise the gain-staging between the signal source
and monitor speaker. If the signal source has a maximum output level
of +20dBu or less set this parameter to +20dBu. If the signal source has a
maximum output level of more than +20dBu set this parameter to +24dBu.
Position
Options: Free Space, Wall, or Corner
The Position setting modifies the frequency response of the monitor speaker
to compensate for the inherent bass boost that occurs if the speaker is
placed near one or more room boundaries.
The diagram below illustrates possible speaker positions relative to the room
boundaries, and the resulting uncorrected bass boost is displayed on the
frequency response chart (right).
(Red curves = no compensation. Green curve = corrected response).
D
B
B
A
C
C
A
B
Advertisement
Table of Contents
