The CPC-LMT is an accessory for the Crestron CPC-CAMI. This accessory provides simple flexibility in mounting a camera/lens assembly. Its unique design eliminates the need for custom plate assemblies. The CPC-LMT mounts quickly and rigidly supports both camera and lens.
The CPC-LMT is delivered assembled. Depending on the camera and lens that is going to be used, the CPC-LMT requires adjustment. The parts bag shipped with the unit includes tools for adjustments and a spacer for camera mounting. A Phillips tip screwdriver and hex keys (supplied) are all the hand tools necessary to mount the CPC-LMT.
Page 7
Interim Plate (3) that would allow proper balancing. 13. The CPC-LMT has two width adjustments. Use either the Adjustment Block (6) or the slots in the Platform Support Arm (1) to adjust for various camera/lens widths.
Problem Solving Troubleshooting The CPC-LMT is designed to be flexible enough to mount to most camera/lens configurations. If further assistance is required, please contact a Crestron technical support representative. Refer to "Further Inquiries" below. Further Inquiries If after reviewing this Operations & Installation Guide, you cannot locate specific...
(3) years from the date of shipment to purchaser. Disk drives and any other moving or rotating mechanical parts are covered for a period of one (1) year. CRESTRON warrants all its other products for a period of one year from the defects mentioned above, excluding touchscreen display components which are covered for 90 days.
Need help?
Do you have a question about the CPC-LMT and is the answer not in the manual?
Questions and answers