Kerlink Wirnet iFemtoCell Installation And Maintenance Manual page 52

2.1.3 South Africa
-ICASA Type approval required-
The Wirnet™ iFemtoCell 868 is compliant to:
Radio Frequency Spectrum Regulations, 2015
SANS 301489-1: Electromagnetic compatibility and Radio spectrum Matters (ERM) -
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part
1: Common technical requirements
SANS 301489-3: Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part
3: Specific conditions for Short-Range Devices (SRD) operating on frequencies
between 9 kHz and 246 GHz
SANS 60950-1: Information technology equipment - Safety Part 1: General
requirements
In South-Africa, the Wirnet™ iFemtoCell 868 can be used with the following limitations:
Frequency (MHz)
868-868,6
868,7-869,2
869,4-869,65
869,7-870
The frequency channels arrangement is the same as in Europe i.e. must be compliant to the
LoRaWAN specification and the regional parameters (EU 863-870 MHz) as defined in
[2].
2.1.4 Saudi Arabia
-CITC approval required-
The Wirnet™ iFemtoCell 868 is compliant to:
RI054 – Specifications for Non-specific Short Range Devices and Ancillary
Equipment
National Guideline for Human Exposure to Radiofrequency Electromagnetic Fields,
2009
GEN001 – Technical Specification – General Requirements
IEC 60950-1: 2005 + A1: 2009 + A2: 2013 - Information technology equipment -
Safety - Part 1: General requirements
This document is the strict property of Kerlink and shall not be either copied nor sent without express
Classification
Internal Use
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Strict confidential
Wirnet™ iFemtoCell
Power Duty
cycle
14dBm ERP 1%
14dBm ERP 0,1%
27dBm ERP 10%
7dBm ERP 100%
Kerlink m2m technologies reserved rights
Document title : Installation and
Maintenance Manual
Version : 3.0
Author : BCA
Date : 2018/11/21
written authorization of Kerlink
[1] and
Page 52 / 100