Highway lorawan gateway for the internet of things (17 pages)
Summary of Contents for Kerlink Wirnet iStation
Page 1
Wirnet iStation LoRaWAN® gateway for the Internet of Things Quick Start Guide Thank you for choosing Kerlink. We are proud to be part of your project. For ecological reasons, this guide has been printed on recycled paper KLK03338_11 Kerlink internal use...
“Product ID” of one of your products will be required). - How to find the “Product ID”? Please look at the Wirnet iStation sticker placed on the right side of the case • For indirect Kerlink customers (meaning if you purchase the product through a distributor), please contact them directly to access document information and support.
• For any Warranty or Maintenance related request (Trouble shooting, help …), - If purchased from a Distributor, please contact the distributor directly for Level1 support - If purchased from Kerlink directly, please open an “Assistance Request” via our ticketing tool called OTRS (Open- source Ticket Request System).
Page 4
Remarks: • The Wirnet™ iStation may be mounted on a wall using four oblong holes located on the mounting bracket (hole spacing 120 mm in width and 116.5 mm in length). • The Stainless-Steel Hose Clamp for mounting on a pole are not included, the width should not exceed 14mm. •...
Page 5
5 Markings Symbol Description Symbol Description Wirnet iStation Type of equipment QR Code CE marking indicating that the product complies with current European 42-57V 200mA Power supply information directives or other marking marking or other marking depending on the country...
Page 6
6.2 Setting connections Before setting all connections, ensure that the power supply is not connected to the mains supply. GNSS, 3G/4G and LoRa antenna are integrated. An external optional LoRa antenna can be added by opening the n°3 (please refer on the chart page 3) button and then screw the antenna directly or via a cable.
Page 7
The Ethernet cable is not provided and must consist of two RJ45 T 568A (or 568B) plugs on each side. KERLINK recommends using a cable with the following characteristics: • Category: 6A • Shielding: STP (U/FTP) or SSTP (S/FTP) •...
Page 8
Blink / 2 seconds Restore stock Blink / 4 seconds For more information on the « Quick start of Wirnet™ iStation Gateway, please consult the Kerlink Wiki: http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:quickstart:quickstart_istation 6.5 First connexion The Wirnet product line embeds a web interface to allow to easily manage the gateways: •...
7.1 Wirnet™ iStation 868 Simplified EU Declaration of Conformity Hereby, Kerlink, declares that the radio equipment type Wirnet™ iStation 868 follows Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.kerlink.com/customer-support/support-wirnet-istation/ In Europe, the Wirnet™...
Page 10
The power supply of the Wirnet™ iStation 915 must be a limited source of power. Note that: Kerlink is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Page 11
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This device must be professionally installed. Country Label, identification and comments Marca : Kerlink Modelo : Wirnet iStation 915 IFETEL : RTIKEWI21-1021 Mexico V10.0 | 25.01.2022 |Page 11...
Page 12
The power supply of the Wirnet™ iStation 923 must be a limited source of power. Kerlink is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Page 13
Indonesia R-R-klk-WIIS923 South Korea 이 기기는 사용중 전파혼신 가능성이 있으며, 타 기기로부터 유해한 혼신을 받을수 있음 There is a possibility of radio interference during use of this device, and it may receive harmful interference from other devices Malaysia Singapore V10.0 | 25.01.2022 |Page 13...
Contact your reseller for warranty conditions of the Wirnet™ iStation. The Wirnet™ iStation is not warranted by Kerlink in case the enclosure is opened, modified, painted, branded out, outlined by CUSTOMER for any reason. Feel free to contact us for a guideline for the branding.
Need help?
Do you have a question about the Wirnet iStation and is the answer not in the manual?
Questions and answers