Table of Contents
Related Manuals for Kerlink Wirnet iFemtoCell-evolution 868
Summary of Contents for Kerlink Wirnet iFemtoCell-evolution 868
- Page 1 Kerlink internal use only Wirnet iFemtoCell-evolution LoRaWAN® gateway for the Internet of Things Quick Start Guide Thank you for choosing Kerlink. We are proud to be part of your project. For ecological reasons, this guide has been printed on recycled paper...
-
Page 2: Need Help
ͳ How to find the “Product ID”? Please look at the Wirnet iFemtoCell-evolution sticker placed on the right side of the case. • On the Wiki, Kerlink is proposing a comprehensive set of documents and information for self- help: ͳ Setup of Wirnet™ iFemtoCell-evolution Gateway: Connection to the gateway, Firmware update, Packet Forwarder installation, Packet Forwarder configuration. -
Page 3: Packet Contents
For any Warranty or Maintenance related request (Trouble shooting, help …) ͳ If purchased from a Distributor, please contact the distributor directly for Level1 support ͳ If purchased from Kerlink directly, please open an “Assistance Request” via our ticketing tool called OTRS (Open-source Ticket Request System) ͳ... - Page 4 LoRa antenna (862-873MHz, 902-928MHZ, 3dBi, 3 bicolor LEDs 50Ω; vertical polarization) Wall mounting oblong holes AC/DC power supply (not provided) Sticker with markings Quick Start Guide (this document) © Copyright photo - Kerlink - all right reserved V3.0 | 01.06.2020 |Page 3...
- Page 5 5. Markings Symbol Description Symbol Description Wirnet iFemtoCell-evolution Type of equipment QR Code CE marking indicating that the product 0,5mA complies with current European Power supply information directives or other marking marking or other marking depending on the country Marking indicating that the product Board ID Serial number of board complies with RoHS directives...
- Page 6 6.2 Setting connections Before setting all connections, ensure that the power supply is not connected to the mains supply. An external LoRa antenna is connected to SMA or RP SMA connector. A 4G/3G antenna is integrated. Once the Wirnet™ iFemtoCell-evolution is installed, you can select up to 2 technologies to access to Internet for the data backhaul: •...
-
Page 7: First Connection
The Ethernet cable is not provided and must consist of two RJ45 T 568A (or 568B) plugs on each side. KERLINK recommends using a cable with the following characteristics: • Category: 6A • Shielding: STP (U/FTP) or SSTP (S/FTP) • Section conductors: AWG26 •... - Page 8 Applicative software means embedded software running on the Wirnet™ iFemtoCell-evolution like KERLINK Small Private Network (SPN) or Kerlink « common » packet forwarder or any another Packet Forwarder (software that forwards LoRa packets received to a server). Please contact your reseller to know the LEDs behavior if the applicative software installed on the Wirnet™...
- Page 9 Password: pdmk-0507DD For security reasons, it is strongly recommended to change the default passwords. More information on the Kerlink Wiki: www.wikikerlink.fr in the section “Connect to the gateway” and in the section “Setup”. 7. Declaration of Conformity 7.1 Wirnet™...
- Page 10 The power supply of the Wirnet™ iFemtoCell-evolution 915 must be a limited source of power. Note that: Any change or modification of this equipment not expressly authorized by Kerlink may cause, interference and void the FCC authorization to operate this equipment.
- Page 11 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 12: Disposal / Recycling
Contact your reseller for warranty conditions of the Wirnet™ iFemtoCell-evolution. iFemtoCell-evolution The Wirnet™ is not warranted by Kerlink in case the enclosure is opened, modified, painted, branded out, outligned by CUSTOMER for any reason. Feel free to contact us for a guideline for the branding.