Subscribe to Our Youtube Channel
Related Manuals for Netti Dynamic System Leg support
Summary of Contents for Netti Dynamic System Leg support
- Page 1 DYNAMIC SYSTEM C O M F O R T user MaNual aND MouNtiNg DesCriPtioN Netti Dynamic system leg support Dual My-Netti.com...
-
Page 2: Table Of Contents
8. Chair widths, leg support introduction to Netti Dynamic heights and fabric for leg supports Netti Dynamic Dual 2. Netti Dynamic leg supports Dual 4 9. transport 3. Daily use of Netti Dynamic 10. Maintenance leg supports. Mounting the leg supports 11. -
Page 3: Introduction To Netti Dynamic Leg Supports
Dystonia (involuntary, sustained seatiNg? or intermittent muscle contractions that can cause twisting and repeti- Netti Dynamic system is a tilt and tive movements, abnormal posture recline wheelchair which allows con- or both. Muscle tone varies from trolled open Kinetic Chain (oK-C) normal or hypotonia to hypertonia. -
Page 4: Netti Dynamic Leg Supports Dual
2. Netti DYNaMiC Dual Features Netti Dynamic leg support Dual is especial designed for users pushing with uneven force with their lower extremities providing open kinetic chain. the gas cylinders works independent and allows for the leg supports to be extended differently - tilting the footboard sideways and also tilting it forwards. -
Page 5: Leg Supports
Warning: users with uneven move- ments of the lower extremities must use Netti Dynamic DUaL leg supports. Netti Dynamic system leg support DUAL allows for dynamic: Plantar flexion of the feet (leg support pivots anteriorly) unilateral extension of the hip... - Page 6 Warning: the adjustment should be carried out by a trained professional the Netti Dynamic leg supports pro- duct range fits to different seat widths. sizes and item numbers: see table on page 15.
-
Page 7: Mounting The Leg Supports
Model: Netti Dynamic Leg support Language: English Version: 2017-05... -
Page 8: Footplate Lock
90 degrees forward! Warning: The footboard lock mUST always be closed when the chair is occupied. LOCK Model: Netti Dynamic Leg support info@solidworks.com Language: English Version: 2017-05... -
Page 9: Adjusting The Dynamic Leg Support
Consider wheelchair balance. see further information to seat depth adjustment in wheelchair user manuals. 4.2 netti Dynamic DUaL: Foot- board height adjustment loosen the M6 screws holding the leg support length-profile on the outside with 5 mm allen key. -
Page 10: Adjustment
With both leg supports in correct height, the calf supports must be ad- justed: 5.1 netti Dynamic DUaL: calf support height adjustment: loosen the two M6 screws with 5 mm allen key - on the half-moon brackets - holding the calf pad arm. -
Page 11: Netti Dynamic Dual
For the dynamic use of the Netti Dynamic system (oK-C) this should be kept loose to allow for the knee joint to move (“oK-C move- ment” for the knee joint). -
Page 12: Footplate Angle Adjustments
Please note - lubrication of the gliding length profiles with white Vaseline is important to ensure smooth function of the Netti Dynamic system leg sup- ports Dual. info@solidworks.com Model: Netti Dynamic Leg support Language: English Version: 2017-05... -
Page 13: Netti Dynamic Leg Supports For Different Leg Lengths
7. Netti DYNaMiC leg suPPorts For DiFFereNt leg leNgths 7.1 one-sided footboard depth adjustment By uneven leg length or leg position: the leg support and footboard depth can be adjusted to compensate for this by the use of extensions pieces and extension bracket on the right leg support. - Page 14 - suiting a user with longer right leg. all mounting illustrations are showed for Netti Dynamic Parallel. the mounting procedure for Netti Dynamic Dual is similar. info@solidworks.com extension platform kit for Dual leg support: 82940 and 82941.
-
Page 15: Chair Widths, Leg Support Heights And Fabric For Netti Dynamic Dual
8. Chair WiDths, heights aND FaBriC For Netti DYNaMiC DUAL leg suPPort: Leg support adj. R Leg support adj. L Chair Foot board *A Calf pad Item no. width 3D fabric 3D fabric (height 20cm) 350 mm 82856 82857 82872... -
Page 16: Transport
Please, follow the description for fixing the chair and the user as described in the user manual for the wheelchair. The netti Dynamic Leg support has to be locked when the wheelchair is used as a seat in a car. -
Page 17: Troubleshooting
Manual for the wheelchairs where the Netti Dynamic system leg support is mounted - for instance: Netti iii hD ( Netti Dynamic iii hD) Netti 4u CeD ( Netti Dynamic CeD) Netti Mobile ( Netti Dynamic Mobile) etc. 12. tests & WarraNtY... - Page 18 Model: Netti Dynamic Leg support Language: English Version: 2017-05...
- Page 19 Model: Netti Dynamic Leg support Language: English Version: 2017-05...
- Page 20 Feel Free to CoNtaCt us: alu rehabaps alu rehab as Kløftehøj 8 Bedriftsvegen 23 DK-8680 ry 4353 Klepp stasjon DaNMarK NorWaY t: +45 87 88 73 00 t: +47 51 78 62 20 F: +45 87 88 73 19 post@My-Netti.com info@My-Netti.com My-Netti.com...
Need help?
Do you have a question about the Dynamic System Leg support and is the answer not in the manual?
Questions and answers