Table of Contents
Advertisement
Thin
Insert the meat probe into the thickest
pieces
part of the meat from the side.
of meat
Thick
Insert the meat probe diagonally into the
pieces
meat from above, pushing it in as far as
of meat
possible.
Poultry
Insert the meat probe into the thickest
part of the breast, pushing it in as far as
possible. The meat probe can be inser-
ted horizontally or vertically depending
on the size and shape of the poultry.
Turn the poultry and place it on the wire
rack breast-side down.
Place the food with the meat probe into the cooking
2.
compartment.
Plug the meat probe into the socket on the left-hand
3.
side of the cooking compartment.
Notes
¡ If you remove the meat probe while the food is
cooking, all the settings will be reset.
¡ Do not remove the meat probe when turning the
food. Once you have turned the food, check that the
meat probe is correctly positioned in the food.
12.3 Setting the meat thermometer
The meat probe measures the temperature inside the
food between 30 °C and 99 °C.
Requirements
¡ The food with the meat probe is in the cooking com-
partment.
¡ The meat probe is inserted in the cooking compart-
ment.
Press the type of heating that you want to use.
1.
a The cooking compartment temperature is high-
lighted in white.
Use the control ring to set the oven temperature.
2.
Set the cooking compartment temperature at least
10 °C higher than the core temperature.
Do not set the cooking compartment temperature to
higher than 250 °C.
Press "Core temperature".
3.
a The core temperature
Use the control ring to set the core temperature.
4.
is highlighted in white.
For some types of heating, you can set added
5.
steam.
→ "Steam", Page 16
Press
to start.
6.
a The appliance starts heating.
a The time, how long the appliance has already been
in operation, and the core temperature are shown in
the display.
a The current core temperature of the food is shown
on the left, while the set core temperature is shown
on the right, e.g. 15|75 °C. The current core tem-
perature only appears once it reaches approx.
10 °C. The heating line refers to the core temperat-
ure.
a Once the dish is ready, a signal sounds. The appli-
ance stops heating. In the display, the current core
temperature is the same as the set core temperat-
ure, e.g. 75 °C|75 °C.
7.
WARNING ‒ Risk of burns!
The cooking compartment, accessories and meat
probe become very hot.
Always use oven gloves to remove hot accessor-
▶
ies and the meat probe from the cooking com-
partment.
When the core temperature is reached:
Press
to switch the appliance off.
‒
Pull the meat probe out of the socket in the
‒
cooking compartment.
Pull the meat probe out of the food and remove
‒
it from the cooking compartment.
Tip: You can also use the meat probe with a different
operating mode. As soon as the meat probe is
plugged in, only the operating modes that can be used
with the meat probe are available to you.
Changing the temperature
1.
After the start of the operation, the core temperature
is highlighted in white. You can use the control ring
to change the core temperature directly.
2.
To change the cooking compartment temperature,
press "Temperature" and use the control ring to
change the cooking compartment temperature.
Changing the type of heating
When you change the type of heating, the other set-
tings will also be reset.
Press
to pause operation.
1.
Press "Types of heating".
2.
Press the type of heating that you want to use.
3.
a The corresponding default temperature appears in
the display.
12.4 Core temperatures of different foods
Here you can find the suggested core temperatures of
various different foods.
These suggestions depend on the quality and the size/
shape of the food. Do not use frozen food.
Food
Poultry
Pork
Beef, rare
Meat probe en
Core temperature
in °C
75
75
50
19
Advertisement
Table of Contents
