8.1 DS3 series Microinverter Datasheet
Model
Input Data (DC)
Recommended PV Module Power (STC) Range
Peak Power Tracking Voltage
Operating Voltage Range
Maximum Input Voltage
Maximum Input Current
Output Data (AC)
Maximum Continuous Output Power
Nominal Output Voltage/Range
Nominal Output Current
Nominal Output Frequency/ Range
Power Factor(Default/Adjustable)
Maximum Units per 20A Branch
Efficiency
Peak Efficiency
CEC Efficiency
Nominal MPPT Efficiency
Night Power Consumption
Mechanical Data
Operating Ambient Temperature Range
Storage Temperature Range
Dimensions (W x H x D)
Weight
AC Bus Cable
Connector Type
Cooling
Enclosure Environmental Rating
Features
Communication (Inverter To ECU)
Transformer Design
Monitoring
Warranty
Compliance
* Nominal voltage/frequency range can be extended beyond nominal if required by the utility.
** Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.
*** To be eligible for the warranty, APsystems microinverters need to be monitored via the EMA portal. Please refer to our warranty T&Cs available o n
emea.APsystems.com
*
*
**
DS3-L
255Wp-550Wp+
18A x 2
730VA
230V/184-253V
3.2A
50Hz/48Hz-51Hz
0.99/0.8 leading...0.8 lagging
6
-40 °C to +65 °C
-40 °C to +85 °C
262mm X 218mm X 41.2mm
Natural Convection - No Fans
Encrypted ZigBee
High Frequency Transformers, Galvanically Isolated
Energy Management Analysis (EMA) system
10 Years Standard ; 20 Years Optional ***
EN 62109-1;EN 62109-2;EN 61000-6-1;EN 61000-6-3;
UNE217002,UNE206007-1,RD647,RD1699,RD413;CEI 0-21;VDE0126-1-1,
VFR2019,UTE C15-712-1,
ERDF-NOI-RES_13E;EN 50549-1;VDE-AR-N 4105
Specifications subject to change without notice - please ensure you are
using the most recent update found at
©
All Rights Reserved
APsystems DS3 series Installation Manual
DS3
300Wp-660Wp+
32V-55V
26V-60V
60V
20A x 2
880VA
3.8A
5
97%
96.5%
99.5%
20mW
2.6kg
2
2.5mm
MC4
IP67
https://emea.apsystems.com/resources/library/
2021/08/30 Rev 2.0
19
Need help?
Do you have a question about the DS3 Series and is the answer not in the manual?