Leveling - GE JEG3002 Use & Care Manual

Dimensions and minimum clearances
The following diagram shows the minimum spacing required for installation.
These dimensions must be observed.
76,2 cm
76 cm min.
46 cm min.
2.2 Leveling the range
We recommend leveling the range to obtain even baking results,
before making gas and electricity connections.
Your range has two leveling legs located at the rear of the floor of the
range. Locate your range at the area where it will be installed.
Place a bubble level on the oven racks. If your range is not level, tilt the
range towards one side using the help of another person, and turn the leg.
Repeat on the other side to get the desired height.
2,5 cm if installed
next to a wall
2 cm for cabinets not
exceeding the cooktop
height or the front of range
53
33 cm maximum
top cabinet
91,5 cm
0,6 cm from
the front of the
side panel to the
front of cabinet