GE JEG3002 Use & Care Manual page 67

To turn on the manual ignition oven.
(See features by model chart, at the end of the manual.)
Make sure that the oven
1
knob is in the off position.
Open the oven door.
2
Locate the burner ignition
3
hole (see attached illustra-
tion).
Light a long kitchen lighter
4
or match.
Immediately after, approach
5
the flame to the burner
ignition hole.
Push in and turn the knob to
6
the 260 °C setting
Before removing the flame,
7
wait until the burner turns
on and make sure that
flames are blue by looking
through the hole on the
oven floor.
Turn the knob to the desired
8
setting.
If the burner does not ignite,
9
turn the knob back to the off
position and repeat the
procedure from step 4.
67
Figure 1