Indications; General; Reading Indications From The Pc With Reydisp Evolution - Siemens 7SR45 Manual

In Service Operation

6.6 Indications

6.6

Indications

General

6.6.1
During operation, indications deliver information about operational states. These include:
•
Measured data
•
Device supervisions
•
Device functions
Data records are stored in the non-volatile memory. The Data Storage menu contains the settings for clearing
events and faults.
In addition, indications give an overview of important fault events after a failure in the system. All indications
are furnished with a time stamp at the time of their occurrence. Indications are saved in logs inside the device
and are available for later analyses. The following number of indications are saved as a minimum in the
respective buffer:
•
Event records – 100 indications
•
Fault records – 10 indications
If the maximum capacity of the fault records log or of the event records log is exhausted, the oldest entries
disappear before the newest entries. Indications can be output spontaneously via the communication inter-
faces of the device and through external request via general interrogation.
Menu Path
Main menu → Fault Data mode
To reach the desired log from the main menu, use the navigation keys of the on-site operation panel.
•
Navigate inside the log using the navigation keys. You will find the most current indication at the top of
the list.
Every indication contains date, time and its state as additional information.
NOTE
i
i
No password entry is necessary to read indications from the device.

Reading Indications from the PC with Reydisp Evolution

6.6.2
Menu Path
Relay→ Events
Relay→ Data Records
To read the indications with Reydisp Evolution, your PC must be connected via the USB user interface of the
device.
74
Log
Fault log
Log
Get Events
Get Data Fault Record
C53000-B7040-C101-1, Edition 08.2020
Reyrolle, Operating, Manual