Table of Contents
Advertisement
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Controls
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
Switching the appliance on or off
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching intensive mode on or off
Switching the intermittent ventilation on or off
6 Basic operation
6.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
6.2 Switching off the appliance
Press
.
▶
6.3 Setting a fan setting
Press , or .
▶
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press
.
▶
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
6.5 Switching off intensive mode
Press
.
▶
6.6 Switching on intermittent ventilation
With intermittent ventilation, the appliance switches the
ventilation on and off at regular intervals.
Press
.
▶
a The appliance runs for approx. six minutes per hour
at fan setting 1.
6
Switching on automatic mode
Resetting the filter saturation indicator
Hob-based ventilation control
Switching Ambient Light on or off
Switching the lighting on or off
Setting the brightness
6.7 Switching on automatic mode
The optimum fan setting is set automatically using a
sensor.
Press .
▶
6.8 Switching off automatic mode
Press , or .
▶
a The ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
a Automatic mode runs for a maximum of four hours.
6.9 Sensor control
In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. De-
pending on the setting of the sensor sensitivity, the op-
timum fan setting is automatically switched on. If the
sensor control system reacts too weakly or too
strongly, the setting for the sensor sensitivity may
change.
¡ Factory setting: 3
¡ Lowest setting: 1
¡ Highest setting: 4
6.10 Setting the sensor control
Requirement: The appliance is switched off.
1.
Press and hold
for approx. four seconds until the
setting is displayed.
Press , ,
or
to change the setting.
2.
To save the setting, press and hold for ap-
3.
prox. four seconds.
Advertisement
Table of Contents
