Netum C750 Manual page 4

Working Via USB Dongle (Wireless Mode)
Get Started: Plug the USB dongle on your computer. If you use US keyboard,
it's plug and play. If you use other type of keyboard , please refer to
"keyboard language" to con
Working Via Bluetooth
Get Started: Scan "Working via Bluetooth",pairing the bluetooth. US Keyboard
is set by default if you use other types of keyboard please con igure keyboard
language before you use it.
Important Notes:
• Make sure the device is in range with Bluetooth turned on.
• Pressing the scan button will initiate the attempts to connect.
• If a connection is made, the blue light will stop blinking and turn solid.
• If a connection is not made after several attempts, the scanner will
emit a long beep (and the blue light will turn off).
• Bluetooth working channel is not set by default.If you want to work via
bluetooth, you have to scan command barcode of "Working via bluetooth"
before pairing. If you want to shift from bluetooth working channel to RF
Wireless channel, you have to scan " RF Wireless Transmit" then plug the USB
receiver into your device.
igure the keyboard language before use it.
%#IFSN0$1
*Wireless Transmit
%#IFSNO$4
Working v ia B luetooth
(3)