FAQ
1. Some barcodes cannot be read, why ?
a. Dirty or unclear barcodes might not be read.
b. The possible reason is that setting for some barcode types not commonly
used is off by default. You need to activate a speci ic barcode type to get it to
work. Please contact us for help or you may go to our of icial
website "www.gzxlscan.com" to download the complete manual and then
refer to the section of
"Symbologies".
2. How to change terminator to TAB ?
Please refer to the section of "Terminator con iguration" from the full manual
downloaded from our of
icial website.
3. Are there any barcodes for applying or removing pre ix & suf
ix ?
Yes, you may go to our of icial website" www.gzxlscan.com" to download the
complete manual ,refer to the section of" pre ix and suf ix" or turn to customer
service for h elp.
4. How to solve the messy code problem encountered while using other foreign
languages?
The default language is English. Please refer to "Keyboard Language" to change
the language.
5. Why scanner can not read Italy Pharmacy code?
Download the full m anual from o ur o f icial website according to the s canner's
model number, refer to the section of Code32 then scan "Enable Code32" to
enable the scanner to read Italy pharmacy code.
6. Why scanner can not read add‐on 2 or 5 codes?
Download the full m anual from o ur o f icial website according to the s canner's
model nubmer, refer to the section of ADD‐On code and scan the appropriate
command barcode to enable the scanner read it.
7. Why scanner can not read datamatrix GS1 in a correct format ?
Scan "Enable Funtion Key Mapping" from this manual will enable scanner to
output group
separator.