Troubleshooting - Creative NOMAD II MG 64MB User Manual

Record Mode
From selected FM station.
G721 ADPCM encoding at 32kbps. Up to 4 hour recording per
64MB
Voice Recording
G721 ADPCM encoding at 32kbps. Up to 4 hour recording per
64MB
Time Scaling
Support for up to 1.5x faster and 0.5x slower playback speed
** - Future audio codec support, firmware upgrades, and SDMI
compliance will be available via www.europe.creative.com
B-2 Technical Specifications and Troubleshooting

Troubleshooting

There is no display on the LCD
Cause
There are no batteries or power supplied to the docking station or the
player is not mounted properly onto the docking station.
Solution
Check that the power switch of the adapter connected to the docking
station is turned on. If it is not, turn on the power switch.
Mount the player properly on the docking station if it is not properly
mounted.
Your SmartMedia reader/writer cannot read the Creative
D.A.P II MG flash memory card
Cause
Creative D.A.P II MG only supports SSFDC (Solid State Floppy Disc
Card) format (FAT12).
Windows 98 detects the Media Card reader/writer as an external
removable drive in Windows Explorer. Thus, you can only format the
flash memory card into FAT16 format and Creative D.A.P II MG is
unable to recognize the FAT16 format.
Solution
To format the flash memory card, you need to obtain a software utility
from the Media Card reader/writer vendor that supports SSFDC
format (FAT12).