Special Features - Bissell SPOTBOT 2117 User Manual

Special Features

Front View
4 - Preset Cleaning Cycles Control PaneI
4
Located on top of the unit, you will find the
Control Panel. Select the cleaning cycle you
would like to use (detailed instructions on page
9). The "Power" and "Done" are not buttons;
"Power" is an indicator light to tell you when the
SpotBot® is ON. "Done" is an indicator light to tell
you when the cleaning cycle is done.
8 - Spray Trigger
Press the Spray Trigger to release water and
formula onto the area to be cleaned. (Only use in
hose/tool mode.)
11 - Vacuum Flex Hose
Wraps around the center of the unit, and serves
as the travel path for dirty water and formula
suctioned into the Dirty Water Tank.
8
The hose can also be unwrapped and used with
the Tough Stain Brush for manual cleaning in
hose/tool mode.
Underside View
15 - Advanced Brushes
Scrub, clean and groom carpet.
16 - Suction nozzles
Provides suction path when using the
hands-free cleaning cycles.
Back View
11
13 - Tough Stain Brush Storage
Stored on-board for your convenience.
14 - Cleaning window
Provides an area to see the hands-free
cleaning action.
NOTE: Unwrap Power Cord
completely before operating the unit.
15
16
13
14
5
www.BISSELL.com