Page 1
STAINEXPERT 6 Carpet & Upholstery Washer _______________ USER GUIDE 21235 More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.com...
Spares may be before cleaning, maintaining or servicing the obtained from your BISSELL supplier. If for any reason the plug appliance, and if your appliance has an accesso- is cut off, it must be disposed of, as it is an electric shock hazard ry tool with a moving brush, before connecting should it be inserted into a 13 amp socket.
Thanks for buying a BISSELL carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. This guide has important instructions on how your new carpet cleaner works, including using (pages 6-8), maintaining (pages 9-10), and if there is a problem, troubleshooting (page 11).
ReadyTools™ Dial Quick Release™ Hose Wrap Belt Access Door 10 Ready-to-Use Hose DirtLifter® PowerBrush Extra Long Power Cord (under nozzle) Lower Hose Wrap Floor Nozzle 2-in-1 Tank Spray Trigger Recline Pedal Cord Clip Power Switch *Tools included may vary www.BISSELL.com...
Attach lower hose rack by sliding it in place on the lower Wrap flex hose around body assembly and securing it with 2 short screws. hose rack and secure it into notched out Attach Tough Stain tool to end of hose. holder as shown. www.BISSELL.com...
Page 6
Pretreating your carpet is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways. a. Spray BISSELL Stain PreTreat formula onto heavy traffic areas, soiled areas, or stains. b. Allow to penetrate for at least 3 minutes.
NOTE: You may notice hair and debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that may have never been deep cleaned before). This debris should be picked up and thrown away. www.BISSELL.com...
Page 8
Allow the hose and tool time to dry before storing. WARNING WARNING: To reduce the risk of injury, be extra careful when cleaning stairs. Make sure the machine is secure and level. www.BISSELL.com...
Page 9
The nozzle will come off to rinse with foot of the machine and lining up hooks of water in the sink. The Nozzle Clean Out the nozzle. Attach and “click” into place. Tool may be handy at this time as well. www.BISSELL.com...
Pictured here is the snap shut. Pump Belt. If broken, gently remove the belt. To re-install a new Pump Belt, loop one end of the new belt around the red pump pulley and then stretch it to the silver motor shaft. www.BISSELL.com...
Refer to instructions on page 10 for Belt DirtLifter® OFF or broken. Replacement. Please visit bissell.com or PowerBrush does call BISSELL Consumer Services at 0344- not turn 888-6644. Instructions will accompany the replacement belt. ReadyTools dial may be on the...
BISSELL Consumer Care or contact your local distributor. BISSELL DOES NOT EXCLUDE OR LIMIT IN ANY WAY ITS LIABILITY FOR (A) DEATH OR PERSONAL INJURY CAUSED BY OUR NEGLIGENCE OR THE This Guarantee is given to the original purchaser of the product from NEGLIGENCE OF OUR EMPLOYEES, AGENTS OR SUBCONTRACTORS;...
Need help?
Do you have a question about the STAINEXPERT 6 and is the answer not in the manual?
Questions and answers