Product View; Special Features - Bissell OXY POWERBRUSH 16949 SERIES User Manual

A

Product View

Do not plug in your cleaner until you have
completely assembled it per the following
instructions and are familiar with all instructions
and operating procedures.
1 Strain Reliever Handle™
2 Quick Release Cord Wrap
3 Power Cord
4 Handle Assembly
5 Lower Body
6 ReadyTools™ Dial
7 Floor Nozzle Window
8 DirtLifter™ PowerBrush
9 Belt Access Door
10 Spray Trigger
11 Power Switch
12 Lower Cord Wrap
13 Measuring Cup
14 Flex Hose
15 Tank-in-Tank™
16 Handle Release
17 Easy Rolling Wheels
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can
clean and protect whenever it fits your schedule. Always use genuine
BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may
harm the machine and will void the warranty.
Note: Additional BISSELL formula options
may be available at your local retailer.
To reduce the risk of fire, use only BISSELL cleaning
formula for full size machines in your deep cleaner.
Use of cleaning formulas that contain lemon or pine
oil may damage this appliance and void the warranty. Chemical
spot cleaners or solvent-based soil removers should not be used.
These products may react with the plastic materials used in your
deep cleaner causing cracking or pitting.
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning formulas
intended for use with the portable spot cleaner.
To reduce the risk of electric shock, always install
float stack before any wet pick-up operation.
www.BISSELL.com
6
CLEANING FORMULA
18 1.5 L 2X Wash & Protect
Professional Formula w/
Scotchgard™ Protector
#1089-E
19 1.5 L 2X Wash & Protect
Pet Stain & Odour Formula
w/ Scotchgard™ Protector
#1087-E
20 1.5 L 2X Wash & Protect
Stain & Odour Formula
w/ Scotchgard™ Protector
#1086-E
21 1 L Oxygen Boost #1134-E
22 1 L 2X Wash & Shine Hard
Floor Solutions #1144-E
23 651 mL Tough Stain
Precleaner #1147-E
B
Assembly
Your OXYPowerBrush™ comes in 2, easy to
assemble components.
Handle Assembly
Lower Body
The only tool you will need to assemble your
cleaner is a Phillips-head screwdriver.
1. Slide the handle assembly (with attached
Quick Release Cord Wrap™) down into the
lower body until it will go no further.
2. Secure the handle by placing one (1)
Phillips-head screw (supplied) through the
screw opening in the lower body and into
the rear of the handle assembly. Tighten
with screwdriver until secure.
OXYPowerBrush assembly is now complete.
C
Operations

Special features

DirtLifter™ PowerBrush
(on select models)
The powered brush roll at the floor nozzle is
designed to enhance cleaning performance.
The bristle pattern lifts out the deep down
dirt while gently grooming carpet fibers. The
floating suspension self-adjusts to all carpet
heights. When the machine handle is in the
fully upright position, CarpetSaver™ auto-
matically raises the brush off the carpet and
protects your carpet if you leave the power
switch ON.
Measuring cup
Your OXYPowerBrush is equipped with
a measuring cup for adding the proper
amount of cleaning formula to the
Tank-in-Tank™. Before using the machine,
simply fill the measuring cup to the fill line
with any BISSELL advanced deep cleaning
formula for full size machines. Pour the
formula into the Tank-in-Tank as shown.
For convenience, the measuring cup stores
on the back of the unit.
Do not use Oxygen Boost formula in the water tank
of the deep cleaner. Oxygen Boost formula is only
meant for use in the Oxy Power Tool. Using Oxygen
Boost formula in water tank may cause harm to the machine and
void the warranty.