Special Features - Bissell 33N8 SERIES User Manual

Special Features

Front view
4 - Preset Cleaning Cycles control paneI
4
Located on top of the unit, you will find the
control panel. Select the cleaning cycle you
would like to use (detailed instructions on
page 9). The "Power" and "Done" are not
buttons; "Power" is an indicator light to tell
you when the SpotBot® is "on". "Done" is an
indicator light to tell you when the cleaning
cycle is done.
7 - Spray trigger
Press the spray trigger to release water and
formula onto the area to be cleaned. (Only use
in hose/tool mode)
10 - Vacuum flex hose
Wraps around the center of the unit, and serves
as the travel path for dirty water and formula
7
suctioned into the dirty water/collection tank.
The hose can also be unwrapped and used with
the tough stain tool for manual cleaning in hose/
tool mode.
Back view
12 - Tough Stain Brush Storage
Stored on board for your convenience.
13 - Cleaning window
Provides an area to see the hands-free
10
cleaning action.
NOTE: Unwrap power cord
completely before operating the unit.
Underside view
14 - Scrubbing Brushes
Automatically spray, brush and remove both
surface and tough stains and odors.
15 - Suction nozzles
Provides suction path when using the
handsfree cleaning cycles.
16 - Deep Reach Technology
Delivers solution further into the carpet where the
deepest part of the stain resides. .
16
14
15
12
13
5
www.BISSELL.com