Assembly; Special Features - Bissell VAC&STEAM 1977E User Manual

Table of Contents

Advertisement

Available languages

Available languages

Assembly

Your hard floor cleaner assembles quickly and
easily, no tools required.
Assemble Your Vac & Steam
Insert the body into the foot until you hear
the locking tab click. Insert the handle into
the body of the unit until you hear a locking
tab click.

Special Features

Easy Touch Digital Controls
The fingertip power controls are located on the
front of the handle. Settings include:
(HI) – High Steam Use for durable floors or on
sticky messes. To turn steam on, press once.
Click again to turn steam off. Can be used
simultaneously with the vacuum function or
separately as a steam mop only.
(LO) – Low Steam Use on delicate floors or for
light, everyday cleaning. To turn steam on, click
once. Click again to turn steam off. Can be used
simultaneously with the vacuum function or
separately as a steam mop only.
NOTE: You must select a steam setting first
and then hold down the hand trigger to
produce steam.
(VAC) – Vacuum On/off switch. Can be used
simultaneously with either steam function or
separately as a stick vacuum only.
NOTE: All settings can be used alone or either
steam setting can be used simultaneously with
the vacuum setting.
Microfibre Mop Pads
Reusable microfibre mop pads are machine
washable and safe for virtually all hard floor
surfaces. The white microfibre pad is best for
everyday use on delicate flooring like sealed
hardwoods and laminate. The gray and white
striped pad can be used for scrubbing heavily
soiled floors and cleaning tougher messes.
WARNING
Do not plug in your hard floor cleaner until
you are familiar with all instructions and
operating procedures.
WARNING
Exercise extreme care when using the Vac
& Steam on hardwood floors. Prolonged
application of steam in one area increases
the risk of damage to the surface treatment
on timber floors. Test steam mop in an
inconspicuous area before mopping a
large area. The steam mop generates hot
steam, so move the unit continuously when
depressing the trigger. The trigger does not
need to be depressed at all times.
Regular foot traffic and direct sunlight will
wear down timber floor surface treatment,
making it more susceptible to steam
damage. Check with your timber floor
treatment and application specialist prior
to steam mop operation.
WARNING
Appliance will not pick up crayons, marbles
and other large objects.
Tip
» Do not attempt to use your
hard floor cleaner on the
steam setting without water
in the tank. You may hear a
knocking sound indicating
there is no water.
WARNING
Be sure to turn off vacuum mode if you
encounter liquid on the floor
www.BISSELL.com
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents