Maintenance & Care - Bissell SPOTBOT 2117 User Manual

Maintenance and Care
1
Press the STOP button to turn the unit
OFF. Unplug the Power Cord from the
outlet and wrap it around the Cord
Wraps.
3
If you were using your SpotBot
manually, wrap the Flex Hose around
the unit and secure the hose into the
hose connector on the front of the unit.
NOTE: Store cleaner in a protected, dry area. Since this product uses water, it must not
be stored where there is a danger of freezing. Freezing will damage internal components
and void the warranty.
2
Empty and rinse the Dirty Water Tank
after each use. To remove the tank, lift
up the dirty tank latch and pull the tank
out. Dump out the dirty water and rinse.
Replace the tank into the unit for storage.
After using the SpotBot® automated
feature, wipe the window and brushing
area with a cloth.
Tips for Storing
• If a significant amount of water
and formula remains in the Clean
Water/Formula Tank, your unit can
be stored with liquid in the tank.
However, if you have added Oxy
Boost or Antibacterial formula into
the tank, it cannot be stored in the
unit and should be flushed.
• Keep your machine clean and clean
out the black valve periodically
inside of the Dirty Water Tank.
www.BISSELL.com
13