3.4
Radio Information
The Radio Information area is shown in Figure 3.11.
Figure 3.11 Radio Information
The Radio Information area provides the following information (as read from the radio):
• Firmware Version: n.n.n
Version of controller code with which the radio is programmed
• Hardware Version: n.n.n
Version of hardware with which the radio was assembled
• DSP Version: n.n.n/n.n.n
First number is the version number of the main radio operating (Flash) software. Second
number is the version number of the radio DSP software.
• SEM Version: n.n
Version of the radio's Subscriber Encryption Module (if installed)
• Bootload Version: n.n
Version of boot code with which the radio is programmed
• ESN: nn-nn-nn-nn-nn-nn-nn-nn
The Electronic Serial Number programmed into the radio during manufacturing.
• Band: 700/800 MHz
The radio frequency band of the radio
• Radio Type: 5100__
The Radio Series selected in the Main Menu from the Radio drop-down menu.
• RF Deck Part Number: nnnnnnnn
Part number of the RF module installed in the radio
• RF Deck Serial Number: nnnnnnnn
Serial number of the RF module installed in the radio
August 2008
PC Tune Test Procedures for 5100 Series Portable Radios 3-11
PC Tune Screens