Pc Tune Installation And Operation; Starting Pc Tune; Exiting Pc Tune - E.F. Johnson Company 5100 Series Assembly And Test Procedures

Hide thumbs Also See for 5100 Series:

Table of Contents

2.3

PC Tune Installation and Operation

Proceed as follows to install and run PC Tune software:

1 Ensure there are no other applications open during this installation procedure. Also,

ensure the computer meets the minimum requirements listed in Section 2.2.

2 Insert the PC Tune CD-ROM in the CD drive of your computer. Double-click on the

PC Tune Application File.

In the lower left corner of the screen, select Start

Select the CD-ROM drive and the file PCTune_x_x.exe (x_x is the PC Tune version

number). Click the Open button and then from the Run window, click OK and the

installation process begins.

3 Follow the on-screen instructions. The default directory for the program is \Program

Files\EF Johnson\PCTune\. During installation, you can specify a different directory to

install the program in if you wish to do so.

4 At the Sentinel Protection Installer, select Next. Please read and accept the license

agreement. Click Next and the Set Up screen is displayed. Select Complete to finish

your installation procedure.

2.3.1

To start the PC Tune program from Windows, select

Start > Programs > EFJohnson > PCTune_3.0.xx

2.3.2

Select File > Exit or click the

August 2008

PC Tune Test Procedures for 5100 Series Portable Radios 2-3

Run, then click the Browse button.

button in the upper right corner of the screen.

Initial Setup

Table of Contents