Initial Setup; Required Equipment - E.F. Johnson Company 5100 Series Assembly And Test Procedures

This section describes PC Tune initial setup as follows:
• Overall equipment requirements
• Computer system requirements
• PC Tune software installation and operation
2.1

Required Equipment

To perform 5100 transceiver alignment and performance tests, the following equipment is
required (see Figure 2.1):
• Computer that meets system requirements (see paragraph 2.2)
• PC Tune Kit, Part No. 250-5100-005, which includes the following items:
- PC Tune software, Part No. 023-9998-499
- 5100 Test Cable Assembly, Part No. 023-5100-940
- Audio In/Out Cable Assembly, Part No. 023-5100-950
• SMA (F) to BNC (F) adapter, Part No. 515-3102-050 (to install at radio antenna jack)
• Communications Analyzer (Aeroflex IFR 2975 or equivalent), with RF cable for
connection to radio antenna jack
August 2008 PC Tune Test Procedures for 5100 Series Portable Radios 2-1
S
E C T I O N
2

Initial Setup

Section2