Pc Configure Upgrade Instructions; Initial Setup - E.F. Johnson Company 5100 ES Series Service Manual

Transceiver Programming
4.4.2.1.2
4.4.2.2
After installing a new version of PC Configure, be sure to transfer the system key and data
! CAUTION
files as described below. Previous PC Configure versions can then be safely uninstalled if
desired (although a previous version does not need to be removed to run a new version).
1 Install the new version of the PC Configure programming software on your computer's
hard drive. The default location of this software is C:\Program Files\EF Johnson\
PC Configure.
2 Using the Windows
the previous PC Configure "Data" and "Keys" folders to the same folders of the new
PC Configure version.
4.4.2.3
1 Connect the programming cable to the serial port of your computer. Remove the
accessory/programming jack cover on the side of the 5100 ES radio and connect the
other end of the programming cable to this jack.
2 Start the PC Configure program.
3 From PC Configure, open the Radio menu and select Series > "5100 Portable". Then
open the Transfer menu and select Baud Rates > "115200" baud.
Note
If a communication error occurs, try selecting a lower baud rate.
4 From PC Configure, verify the current code version by opening the Transfer menu and
selecting Read Version Info from Radio. Note the Controller Version number in the
window that is displayed. This indicates what code base version to use. For example, if
the radio currently has Ver 4.8.x, the new code must have a 4.x.x version number.
5 Using the Windows File Explorer application, copy the code file "Ver_0x_xx_xx.hex"
on the included CD-ROM to the PPC\5100 folder under the new version of PC
Configure located at C:\Program Files\EF Johnson\PCConfigure.
6 If new Boot code is also included, copy the "CodeDownLoadROM_1_x.hex" file on
the included CD-ROM to the PPC\5100\Upgrade folder under the new version of PC
Configure located at C:\Program Files\EF Johnson\PCConfigure.
4-4 5100 ES Series Portable Radio Service Manual
Equipment Required
Description
PC Configure Software on CD-ROM
Windows -Based Computer
®
5100 Programming Cable

PC Configure Upgrade Instructions

®
File Explorer application, copy the system key and data files from

Initial Setup

Part No.
023-9998-527
-
023-5100-920
January 2007