Cradlepoint MBR95 Product Manual page 90

CRADLEPOINT MBR95 | USER MANUAL Firmware ver. 3.2.4
Configuration Rule: Modem Settings
AT Dial Script: Enter the AT commands to be used in establishing a network connection. Each command must be
entered on a separate line. All command responses must include ― OK‖ except the final command response, which must
include ―CON N ECT‖.
Example:
AT
AT+CGDCONT=2,‖IP‖,‖isp.cingular‖
ATCT*99***2#
PPP Authentication Protocol: Set this only if your
service provider requires a specific protocol and the Auto
option chooses the wrong one.
 Auto
 PAP
 CHAP
PPP Password: Password for PPP authentication.
PPP Username: Username for PPP authentication.
SIM PIN: PIN number for GSM modem with a locked SIM.
Access Point Name (APN): Some wireless carriers
provide multiple Access Point Names that a modem can
connect to. If you wish to specify an APN, enter it into this
field. Some examples of APN are ‗isp .cingular‖ and
―v pn.com‖. This APN will be set in the first profile position.
LTE Connection Mode: Specify how the LTE Multi Mode
modem should connect to the network.
 Auto: Let the modem decide which network to use.
 Auto EVDO/1xRTT: Connect to CDMA, letting the modem decide which 3G network to use. Do not attempt to
connect to LTE.
 Force LTE: Connect to LTE only (do not attempt to connect to CDMA/GSM).
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 88