Cradlepoint MBR95 Product Manual page 19

CRADLEPOINT MBR1400 | USER MANUAL Firmware ver. 3.2.2
3.3.3 Your MBR95 router gets an IP conflict when you plug it into your Cable or DSL modem.
 If your Cable or DSL modem is not working with the router, check that there is not an IP conflict. Go to Internet →
Connection Manager and find the Ethernet connection under WAN Interfaces. If it says ―IP conflict‖ you will need
to change the IP address of the MBR95 router from ―1 92.168.0.1‖. A suggested IP address is ―19 2.168.10.1‖.
 Change the IP address by going to Network Settings→ WiFi / Local Network. Find the IP address under ―LA N
Settings‖ and type the alternate IP address. Click Apply to save the settings.
NOTE: To access the router administration pages after changing the IP address you will need to go to the new IP address in your internet browser
instead of ― http://192.168.0.1‖. You may continue to use ― cp/‖ to access the router administration pages after this change.
If you are still unable to access the internet after following the above directions, contact CradlePoint Technical Support for
further assistance.
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 17