Cradlepoint MBR95 Product Manual page 87

CRADLEPOINT MBR95 | USER MANUAL Firmware ver. 3.2.4
7.3.2 Modem Connection Settings (Advanced Mode Only)
This section changes settings that affect how all modems attempt to connect to the service provider's network.
Connection Mode: Typically modem connections are not set to remain on. The router allows you to set the type of
reconnection mode.
Always On: A connection to the internet is

continuously maintained.
On Demand: A connection to the internet is

made as needed.
Manual: The administrator has to navigate

to the Connection Manager (Internet →
Connection Manager) page and use the
control buttons shown in the WAN Interfaces
table.
Maximum Idle Time: The interval at which the machine can be idle before the modem connection is disconnected. This
setting is only valid for the "On Demand" and "Manual" connection modes.
Aggressive Reset: When Aggressive Reset is enabled the system will attempt to maintain a good modem connection. If
the internet has been unreachable for a period of time a reset of the modem will occur in attempt to re-establish the
connection.
7.3.3 Modem Configuration Rules (Advanced
Mode Only)
This section allows you to create simple or
complex rules that affect how individual modems
or classes of modems (perhaps all WiMAX
modems or all modems from Sierra Wireless)
behave in the router.
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 85