Steps
1. Align and place the I/O board on the system.
2. Replace the four (M1.6x3.5) screws to secure the I/O daughter board in place.
3. Connect the LED board cable, fingerprint reader cable, and I/O daughter board data cable to the connectors on the I/O
board.
Next steps
1. Install the
I/O duaghter board
2. Install the
system
fan.
3. Install the
base
cover.
4. Install the
SIM card
tray.
5. Install the
microSD
card.
6. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
SIM card
4. Enter
service
mode.
5. Remove the
base
cover.
6. Remove the
system
fan.
7. Remove the
I/O daughter
About this task
The following images indicate the location of the power-button and provide a visual representation of the removal procedure.
cable.
After working on your
computer.
before working inside your
card.
tray.
board.
computer.
Removing and installing components
33