Chroma 61601 Quick Start Manual page 13

Programmable AC Source 61601/61602/61603/61604 Quick Start Guide
Item Symbol
1
2
3
---------or--------
PAGE
PAGE
PAGE/EXIT
---------or---------
SAVE
4
----------or---------
RECALL
5
6
OUT/QUIT
1-2
Table 1-1 Description of the Front Panel
Display: The LCD is to display configuration,
output setup, and
Indicator LED: "OUT" and "SHIFT", for showing
activation of output and shift mode, are available
which are located on the keypad area next to the
corresponding keys.
Cursor moving keys: These two keys are to
move the cursor to different directions
respectively. In normal mode, pressing any of
these two keys will change the place of the
cursor. Under shift mode, these keys enable the
LCD display to change to last page or next page if
there are
display.
PAGE or EXIT command key: Pressing this
key will make the LCD display switching
between MAIN PAGE and CHOICE PAGE. Or
change to CHOICE PAGE in each functional list.
Under shift mode, pressing this key on MAIN
PAGE, the uses can save the output setting
(see 3.8.1 in Programmable AC Source 61601/
61602/61603/61604 User's Manual). If
pressing the key on CHOICE PAGE, the user
can save system data (see 3.8.2 in
Programmable AC Source 61601/61602/61603/
61604 User's Manual).
Backspace and Minus command key:
Pressing this key will erase the keyin number.
/ -
Or it may show " - ", if no number is in front of
cursor. Under shift mode, pressing the key on
MAIN PAGE, the user can recall the output
setting (see 3.8.1 in Programmable AC Source
61601/61602/61603/61604 User's Manual). If
pressing the key on CHOICE PAGE, the user
can recall system data (see 3.8.2 in
Programmable AC Source 61601/61602/61603/
61604 User's Manual
OUT/QUIT command key: Pressing this key may
enable the ac source output voltage or quit the
output voltage.
Description
measurement results.
or patterns in right-down side of
).