Opening The Burner; Closing The Burner - Riello RLS 1000/M MX Installation, Use And Maintenance Instructions

7.3

Opening the burner

Disconnect the electrical supply from the burner
by means of the system main switch.
DANGER
Close the fuel shut-off valve.
DANGER
Wait for the components in contact with heat
sources to cool down completely.
20062800
7.4

Closing the burner

Refit following the steps described but in reverse order; refit all
burner components as they were originally assembled.
After carrying out maintenance, cleaning or
checking operations, reassemble the cover and
all the safety and protection devices of the burner.
20148180
Maintenance
 Remove the tie-rods 1) and 4)(Fig. 45) of the head
movement and damper opening lever, loosening nut 2);
 disconnect the socket 3) of the servomotor;
 Disconnect the socket 7) of the derivation unit;
 remove the screws 5).
At this point, it is possible to open the burner on the hinge.
40 GB
Fig. 45