DeWalt DW030PL-KR User Manual page 14

E
E
DO NOT remove any warning label(s) on the housing. This instrument must
only be used for tasks as outlined in the Product Manual.
ALWAYS make sure that any bystanders in the vicinity of use are made aware
of the dangers of looking directly into the laser beam.
DO NOT use in combination with other optical instruments. Do not modify the
laser tool, make adjustments or use in other applications than those described
in the Product Manual.
DO NOT look into the beam lens with optical aids, such as magnifiers,
binoculars or telescopes.
DO NOT stare into the laser beam lens.
DO NOT operate the laser tool if damaged or broken.
DO NOT direct the laser tool at other persons.
DO NOT set the instrument at eye level whenever possible.
ALWAYS turn the laser tool OFF when not in use. Leaving the laser tool ON
increases the risk of someone inadvertently staring into the laser beam.
DO NOT operate the laser tool in combustible areas such as in the presence of
flammable liquids, gases, or dust.
DO NOT disassemble the laser tool. There are no user serviceable parts inside.
Disassembling the laser will void all warranties on the product. Do not modify
the product in any way. Modifying the laser tool may result in hazardous laser
radiation exposure.
DO NOT use this instrument in areas where a risk of explosion is present.
14
3