Table of Contents
Advertisement
REMOTE ADHESIVE INSTALLATION
Before applying
adhesive strip, make
sure the wall surface
is clean and dry. If
cleaning is necessary,
gently wipe with
isopropyl rubbing
alcohol. Do not use
household cleaners.
Remove the liner
from one side of the
adhesive strip and
apply sticky side
to back of remote
mount as shown. Make
sure the strip tab is
accessible for future
removal.
1
The remote should
be installed in
a place most
convenient to
access from either
side of the gate
(e.g., door jamb).
Remove the liner
from the other side
of the adhesive strip
and press remote
mount firmly against
the door jamb for
30 seconds.
Then, wait 1 hour
before proceeding
to step 3.
2
32
Advertisement
Table of Contents
