Table of Contents
Advertisement
GATE FASTENER INSTALLATION
Note: If you are
attaching to a stud
or into wood, you do
not need to follow
this step. Proceed to
step 7.
Using a 3/16" (4,76
mm) drill bit, drill
one hole through
each pencil mark you
made on the wall.
5
Fit a wall anchor
into each of the
drilled holes.
Tap each wall
anchor lightly with
a hammer until the
ends of each wall
anchor are even
with the surface of
the wall.
6
19
x 3
Advertisement
Table of Contents
