Table of Contents
Advertisement
GATE FASTENER INSTALLATION
Note: If you are
attaching to a stud
or into wood, you
do not need to
follow this step.
Proceed to step 13.
Using a 3/16"
(4,76 mm) drill
bit, drill one hole
through each
pencil mark you
made on the wall.
11
Fit a wall anchor
x 3
into each of the
drilled holes.
Tap each wall
anchor lightly with
a hammer until the
ends of each wall
anchor are even
with the surface of
the wall.
12
22
Advertisement
Table of Contents
