Overview - Sony DSBK-2020 Installation Instructions Manual

Overview

The DSBK-2020 HD Up-Converter Board is an optional board for
installation in the Sony DSR-2000/2000P/2000A/2000AP Digital
Videocassette Recorder.
The principal features of this board are as follows.
• An SD video signal from DSR-2000/2000P/2000A/2000AP
• A DSR-2000/2000P/2000A/2000AP input signal can be up-
1) HD SDI : SMPTE 292M compliant
• For the external reference signal, an HD 1125 bipolar tri-level sync
• An HD video process controller is not supported. A video signal
• SD and HD signals are output simultaneously, but HD SDI output is
• When installed in the DSR-2000/2000P, it is not possible to use other
• The following restrictions apply when an input signal is up-
• Installing this board requires a DSR-2000/2000P/2000A/2000AP
playback is up-converted to an HD video signal, and supplied from
two HD SDI outputs
signals (four channels) synchronized to the up-converted video
signal, and timecode embedded.
converted to an HD SDI output. However, this is subject to
restrictions: read the following "Notes".
Notes
signal is not supported.
reflecting SD video process control is up-converted.
delayed one frame with respect to SD output.
option boards simultaneously. Installing the DSBK-2020 provides an
i.LINK connector in the connector panel, but there is no i.LINK
interface.
converted.
- It is not possible to up-convert an i.LINK input or SDTI input to an
HD SDI output. When an i.LINK input or SDTI input is selected,
in the E-E mode HD SDI output is muted.
- Timecode input is supported through the timecode input connector
or by a VITC signal inserted in a video signal. Embeded timecode
(RP188) in an SDI input is not supported.
In this mode, to embed timecode set menu item 902 (SYSTEM EE
MODE) to ON, and set the timecode to EXT/REGEN.
upgrade.
For details, consult Sony service representative.
1)
. The HD SDI output signal also has audio
Overview 19